7838 posts / 0 new
Last post
Fri, Jan 17, 2014 - 4:30pm
Nick Elway
Offline
Joined: Jun 14, 2011
1100
5243

Putin muzzles Snowden as a favor to the US

Continuing on from JY's fine post:

https://www.tfmetalsreport.com/comment/242226#comment-242226

From Joel Skousen's https://worldaffairsbrief.com July 19 2013

Quote:

Snowden Forced to Request Asylum in Russia: With the US successfully pressuring other nations not to allow NSA whistleblower Ed Snowden to overfly their territory and gain asylum in Latin America, Snowden was forced to apply for temporary asylum in Russia. Snowden had earlier refused Russia’s asylum offer because of Putin’s condition that he not leak any more evidence of US spying to the world. Now the Russians have left him no choice but to seek asylum in Russia.

Russian President Putin wants Snowden to stay in Russia so he can muzzle him and gain additional disarmament concession from the US for doing so. Russia has already gained the propaganda value of the damaging revelations on US spying, but now Putin gets to play the hero to his people for standing up to the US, and yet placates the US under the table.

Russia was one of the few nations that could have defied the US imposed air blockade of Snowden’s flight to Latin America, but Russia refused to help, knowing that this would force Snowden to stay in Russia where he can be controlled as a favor to the US. It’s not that Russia is our friend but that Russia desperately wants more US unilateral disarmament before it launches its long awaited pre-emptive strike on the West—still some years away.

Der Spiegel said that Snowden’s activist status largely united a deeply divided society in Russia: Whether conservative or liberal, anti- or pro-American, Putin supporter or opponent – they have all voiced support for granting (him) asylum.

So, while Putin is expected to reap a windfall of popular support by helping Snowden, he’s doing it more to both seduce the US into more arms concession, and to also make the US out to be the bully of the world, which ultimately justifies a future attack on the US.

As the Sleuth Journal noted, the world seems to be longing for someone to stand up to US bullying—something I’ve been saying for years, and which US globalists are actively exacerbating in order to help Russia justify their attack on America (which the globalists want so they can force Americans, in the aftermath of an attack, to support a militarized NWO government):

Russia’s mass-circulation Komsomolskaya Pravda praised Putin’s support. Putin... wants people believing Russia remains a superpower. It’s proud and reassertive. It’s not about to roll over for Washington. It’s able to confront US policymakers effectively. At the same time, delicate balancing is important [until Russia gets the concessions they want]. He wants no further bilateral deterioration. Short-term doesn’t matter. Longer-term good relations are valued [no, long-term deception is the key. Sleuth Journal has a Leftist bent, and doesn’t see Russia as the future enemy it is]. Putin holds more trump cards than Obama. America’s influence is waning. It’s slow but perceptible. No one likes a bully. Washington makes more enemies than friends.

Fri, Jan 17, 2014 - 5:57pm
dgstage
Offline
-
Horseshoe Bay, TX
Joined: Jun 14, 2011
1637
6732

BOG

I would like to fly to the moon with Mr. Fix and see you.

dgfish
Fri, Jan 17, 2014 - 10:07pm
Mr. Fix
Offline
-
NY
Joined: Jun 8, 2012
10736
64164

DG, I second that motion!

 Hi guys, thank you for all your correspondence, I just needed a day to think about it. While experimenting earlier this afternoon, and still getting nothing, I stopped the generator, and turned it by hand, with the voltmeter hooked to a coil, and realized that it was going from positive to negative with each pass of the nails.

 Alternating current!

 It was a stupid oversight on my part, I ran to RadioShack and bought a bridge rectifier, that so I could actually measure my output. The good news is, there is plenty.

 AG, thanks for the Amazon link, I'm going to need that superfine magnet wire for my coils, so I'm ordering up a few roles. I'm going to put that whole neodymium powder thing on my “get back to it later” list, and start winding some coils.

 So far, I've just connected my voltmeter to the coils as they come from RadioShack, still on the spool.

 I am measuring both millivolts and milliamps, but I've got nearly a volt, and I haven't wound anything yet.

 As far as the neodymium is concerned, it is only one component in a neodymium magnet. It is also mixed with iron and boron, so if I grind up the magnet, it won't be pure neodymium, but it's still probably better than nails.

 During the week, I will grind up some magnets that I have, I've got a few hundred ceramic magnets,

 I'll remove the rotor, and lay in a layer of the powder on both sides, I can always change it out later.

 Obviously, I've got a long way to go to get to the big voltage and amperage, but all of Tesla's designs that involve accessing the zero point field, involve very high-voltage at a very high frequency. I've got what I need to make that, there is just a lot of assembly required.

 Basically, I'm working on the theory that if I supply the inner coil with high-frequency high-voltage, and even time it with a commutator, or just a set of breaker points, to correspond with the breaking of the magnetic field, it may draw a considerable amount of energy in from the environment, and transmit It to the outer coil.

 In looking again at the drawing of “Don Smith's separator coil”, it's interesting that his picture of a battery looks exactly like an automotive coil.

 It is my understanding that many of these sketches are intentionally cryptic, so that a pencil pushing bureaucrat won't be able to figure it out, but someone with enough experience in the field might be able to connect the dots.

 I watched videos all night long last night, and watched the founder of something called “the Orion project”, (Google it), he has an organization that intends to bring free energy to the world, he's just looking for a working prototype. He has seen many of them in person, but they've all been owned by people unwilling to sell, or have been bought out by people unwilling to market them. Those that have tried to bring them to market have had negative consequences, some resulting in death.

 Interestingly enough, on his webpage, if you go to look at the research he's been doing, they built a “Adams motor”, which is exactly something that I have already done, they're trying to get it working, but mine already does. There have been many on the Internet trying to get the electronics to work, but the original inventor used a basic set of brushes, and a commutator which he handmade, so I built it like he did, and it works.

 It's a mystery to me why everybody else is trying to improve on what he built, and can't get it working because they've over complicated it. I have found that there are no electronics required in his design, just a lot of careful fabrication. 

 There are some neat pictures, but I don't think an Adams motor can ever power a house, it can barely power itself.

 At least I feel like I've overcome the basic “poof of concept”, and I now know that the generator does produce electricity, it's only a matter now of how much.

 For the time being, I'm only going to work on a couple of magnets, and maximize their output.

 I will add the automotive coil, and the extra hardware required to make it function.

 Hopefully my superfine magnet wire will arrive early next week, and I can start experimenting with that, but in the meantime, I'm going to use my RadioShack magnet wire and make a set of coils so I can figure out polarity, if it matters, particularly in connecting one side to the other, and I'm also thinking of changing out the gear drive with a belt drive, because the only noise it makes is the reduction gears, and since I do most of my experimenting while the ladies are sleeping, I need to make as little noise as possible.

 Also, I need to balance the rotor a little bit better, it will already walk itself across the room, if I'm not holding onto it, I have to duct tape it to the floor to keep it in place. (Antigravity?) Ha ha!

 I have considerable experience fabricating crap on my living room floor with the hand tools from the trunk of my car, it probably won't take all that long to refine this into a truly technological marvel.

 At least I can still dare to dream,

 somebody has to.

 Bag of gold, your latest picture is suitable for framing, but for the time being, it's just my screensaver.

 Thank you.

"When the student is ready, the teacher will appear."
Fri, Jan 17, 2014 - 10:28pm
Dyna mo hum
Offline
Joined: Jun 24, 2011
2697
17820

Mr. Fix

When my welder generator sits for a long time I have to "flash it" with 12 volts. I use jumper cables to flash the armature. Check out that process it might help???

Fri, Jan 17, 2014 - 11:15pm
beach_bum
Offline
-
NY
Joined: Jun 23, 2011
102
618

Speaking of Electrical Power...

This is awesome.

The States Strike Back: Washington State Introduces Bill to Cut Off Power to the NSA Posted on January 17, 2014

We know the NSA shares data with state and local law enforcement. We know from a Reuters report that most of this shared data has absolutely nothing to do with national security issues. This bill would make that information inadmissible in state court. This data sharing shoves a dagger into the heart of the Fourth Amendment. This bill would stop that from happening. This is a no-brainer. Every state should do it.”

- Mike Maharrey, National Communications Director of the Tenth Amendment Center 

In case you haven’t heard of the OffNow coalition, the group is leading a nationwide charge to convince state legislatures to put a stop to the NSA’s unconstitutional spying by restricting crucial state resources such as water and power to NSA facilities. This tactic first received national attention earlier this year when California introduced such legislation, but it does not have actual NSA facilities in the state. Washington State does.

The NSA operates a listening center on the Army’s Yakima Training Center (YTC), and there is a bipartisan effort in Washington to prevent the allocation of state and local resources to the facility as long as the spy agency continues to violate Americans’ 4th Amendment rights. The Bill is called HB2272 and it is based on model language drafted by the OffNow coalition.

Kudos to Washington state, which has been leading the way in various freedom related issues, such as the drone debate as well as marijuana legalization.

rest: https://libertyblitzkrieg.com/2014/01/17/the-states-strike-back-washingt...

Mr. Fix - exciting stuff with your project!

Sat, Jan 18, 2014 - 9:50am
Marblesonac
Offline
Joined: Jun 14, 2011
493
2808

Mr Fix = Doctor Emmett Brown

Back to the Future

1.21 Gigiwatts!!

1.21 Gigawatts - Back to the Future (6/10) Movie CLIP (1985) HD

Guess I'll be calling Fix "Doc" from now on cheeky

Sat, Jan 18, 2014 - 1:42pm
silver66
Offline
Joined: Oct 8, 2012
3340
15586

two tax codes

One for citizens and one for American Nationals/non resident aliens

https://famguardian.org/Publications/GalileoParadigm/TheGalileoParadigm.pdf

would love reasoned feedback on this pdf book

Silver66

Silver66 Rage against the dying of the light

Sat, Jan 18, 2014 - 3:36pm
57Goldtop
Offline
Joined: Mar 31, 2012
505
3713

66

Hope you had a good trip bro.

I opened up that PDF the other day when you emailed it, and was absent mindedly scrolling through it on my tablet in a meeting. My thumb almost fell off before I got to what I thought was a block of text. Lol. Maybe it was simply because of the excellent footnotes.

I'll give it another go this weekend.

Sat, Jan 18, 2014 - 4:12pm (Reply to #4069)
silver66
Offline
Joined: Oct 8, 2012
3340
15586

good to see you posting 57

You must be incredibly busy at work

Just as an fyi, when I was out west I met with a money manger we use. He is 75% cash and can't find anything to buy at these prices/valuations. Just as a reference, he was 83% cash in late 2007

He is not calling the market but is patiently waiting to buy when there is blood in the streets

Silver66

Silver66 Rage against the dying of the light

Sun, Jan 19, 2014 - 10:48am
abguy4
Offline
-
rochester, NY
Joined: Jun 15, 2011
2075
15134

@DG....IODINE~!

This guy Dr Brownstein is just immeasurably valuable in a person's search for rejuvenating health. He discusses the need for everyone to rejuvenate their thyroid as the primary determinant of internal health. Iodine/thyroid detox treatment is as important as eliminating incoming toxins. You must displace and flush the excess residuals of fluorine and bromine from your system and principally the thyroid - EVEN if you have tested "OK" on the basic (and purposely false) medical scan~! I never knew the monstrous importance of Iodine - even after 45 years of health interest and study and supplementation - and that's because the pharmaceutical industry has maliciously buried the knowledge, to the same extent that the oil cartel has buried Free Energy.

This is well worth your time~!:

American Nutrition Association- Brownstein May 2011
Sun, Jan 19, 2014 - 12:54pm
beach_bum
Offline
-
NY
Joined: Jun 23, 2011
102
618

Wow (apologies for long post)

Mr Fix. I went to that site you referenced, The Orion Project. So very interesting! And all I've done so far is follow one link on one page - and I haven't even finished that. It is a huge page detailing 95 individual Energy Invention Suppression Cases. I apologize in advance for the long post but this was just too interesting and what is below is a small fraction of what is there. And at that, I highly edited this to try and keep it short. The full version with references to quoted sources and more is here. The part I have below starts near the bottom of page 17. Most of the details of more modern suppression cases are much shorter. https://www.theorionproject.org/en/documents/Gary_V.pdf

Thomas E. Bearden, Ph.D. (Reporter): J.P. Morgan Emasculated Electrical Engineering Theory

Thomas E. Bearden, Ph.D. offers an insight into what really happened more than a century ago when the foundations were laid for eventually providing electricity to billions of people. In the 1880s and 1890s Nikola Tesla (backed by Westinghouse, a decent man) destroyed the great dreams and preparations of John Pierpont Morgan and Thomas Edison for moving the world into DC electrical power, requiring a DC power plant about every two miles, for example. Instead, with the support of Westinghouse, Tesla gave the world the much more practical AC power systems, where the electric power is much more easily transmitted over transmission lines to distant destinations, without the serious losses as DC transmission entails.

This and Tesla’s clearly enunciated intention to give the world clean free electromagnetic energy from the “active medium” itself, brought J. P. Morgan to regard Tesla as his mortal enemy, to be destroyed or curtailed at any cost.

But Morgan was not only ruthless, but thorough. In the latter 1880’s, etc., when Tesla was gung ho to give us free energy from the active medium, Morgan also anticipated the future of this “energy freely extracted from the active medium” problem that had suddenly risen in Tesla’s work. At the time, there were less than three dozen “electrodynamicists” in the entire world. Maxwell had died in 1879, and those who despised quaternions (Heaviside, Hertz, Gibbs, etc.) immediately chopped Maxwell’s 20 quaternion- like equations in 20 unknowns into a very much smaller vector subset containing only four equations. Maxwell’s theory was never accepted during his own lifetime, but only begrudgingly and very slowly after (eight or nine years after Maxwell’s death) Hertz performed speed-of-light measurements showing Maxwell was correct.

The real Maxwell theory has never been routinely taught in electrical engineering, which contains only a pale shadow of it.

Free download of that original Maxwell theory can be made directly from the ZPE website, at links

https://www.zpenergy.com/downloads/Maxwell_1864_1.pdf - this is just one of several there.

The Heaviside severely truncated equations were “chosen” as the basis equations for the new “electrical engineering” that was beginning to be set up in a few universities here and there. Morgan apparently had the “new” equations (for the new electrical engineering being born) checked via group symmetry (adopted in 1870, so therefore well known by the very few leading electromagnetic scientists of the world at the time) to see if the “new” science/equations contained any of those “systems taking excess free energy from the active medium” – in short, containing any of Maxwell’s asymmetrical systems present in the full Maxwellian theory. In short, Morgan was determined not only to suppress Tesla, but also to suppress any future “young Tesla” who might be stimulated to see and develop “free energy from the active medium” Tesla systems. The review of Morgan’s scientific advisors was not good; the “new” and truncated Heaviside equations were still not totally symmetrical, which meant some of those dirty old asymmetric Maxwellian systems were still there.

Morgan, of course, just directed that it be “fixed”. And Lorentz was the fellow chosen or arranged to do the job; in 1892, Lorentz arbitrarily symmetrized the Heaviside equations – just to “make them easier to solve algebraically”, so the story went. He thereby firmly excluded all asymmetrical Maxwellian systems from the standard electrical engineering model, from its very birthing.

This is what arbitrarily eliminated (from standard electrical engineering) the use of “Tesla” asymmetrical Maxwellian systems that do receive excess electromagnetic energy freely from the active medium – and thus can function at a coefficient of performance (COP)>1.0 precisely similar to a windmill-driven electrical power system or a solar panel powered electrical power system. A real system with real losses will always have efficiency (total useful energy or work output divided by the total energy input from all sources) of less than 100%. But if it asymmetrically receives (freely or nearly freely) excess energy from its active environment, then its coefficient of performance (total useful energy or work output divided by the total energy input by the operator only) can permissibly exceed 1.0. No laws of nonequilibrum thermodynamics are violated, as are no laws of physics.

Two persons – Oliver Heaviside and John Poynting – independently and simultaneously discovered the flow of electromagnetic energy through space in the 1880s and early 1890s; before then, the concept does not appear in physics. Poynting only considered a very tiny part of the “total electromagnetic energy flow pouring from the generator terminals and flowing through space outside and along the external conductors (of the external circuit)”. That tiny part is the small fraction of the energy flow – the linear part – that gets diverged into the conductors to “potentialize and power up the electrons” and the external circuit. Heaviside also discovered a giant curled electromagnetic energy flow component in addition to the diverged little component. The nondiverged curled electromagnetic energy flow component is more than a trillion times greater in energy magnitude than the feeble Poynting component.

Well, again it would simply not do (in Morgan’s relentless view) for our young future electrical engineers to know and be taught that the generator actually outputs more than a trillion times as much electromagnetic energy output as the mechanical energy input one furnishes to crank the shaft of the generator. That would mean it would just be a matter of time before some young budding genius would discover how to trick some of that giant curled Heaviside component into diverging into the conductors after all, thus producing Tesla “energy from the external active medium” systems after all.

So again, Morgan would have issued orders to “fix it!”

And so Lorentz was arranged once again to do the dirty work. In 1900 he stated that this giant curled Heaviside component “does nothing”, since it does not interact, and so it “has no physical significance”. And he arbitrarily just integrated the entire energy flow vector (containing both the diverged Poynting energy flow component and the usually nondiverged Heaviside giant curled energy flow component) around a closed surface assumed around any volume element of interest. Thereby Lorentz misinformed us that this nondiverged giant energy flow had “no physical significance” and taught us to just deliberately cancel it as a matter of course.

In his August 16, 2007 email to Gary Vesperman and Leslie Pastor, Thomas Bearden adds:

A quote of interest is: “This has led to one of the greatest ironies in history: All the hydrocarbons ever burned, all the steam turbines that ever turned the shaft of a generator, all the rivers ever dammed, all the nuclear fuel rods ever consumed, all the windmills and waterwheels, all the solar cells, and all the chemistry in all the batteries ever produced, have not directly delivered a single watt into the external circuit’s load. All that incredible fuel consumption and energy extracted from the environment has only been used to continually restore the source dipole that our own closed current loop circuits are deliberately designed to destroy faster than the load is powered.”

Here is a little exercise that is revealing to think about:

Take a common permanent magnet and sit it on the bench. Lay an electret across it so the E-field of the electret is at right angles to the H-field of the magnet. Then by the ordinary Poynting theory already accepted and contained in every basic electrical engineering textbook, that silly thing sits there and continuously pours out a steady Poynting stream of real electromagnetic energy flow S, given by
S = E X H.

The CEM/EE folks just shrug and walk away from that embarrassing problem. A typical comment is one by Buchwald:

"[Poynting's result] implies that a charged capacitor in a constant magnetic field which is not parallel to the electric field is the seat of energy flows even though all macroscopic phenomena are static."

Energy Invention Suppression Cases 21 September 3, 2007

So there is no problem at all in establishing as large a continual free electromagnetic energy flow as one wishes. Anywhere, anytime. Simply make a dipole, or crossed E and H dipoles, then leave it alone. As Nobelist Lee pointed out, when you have a broken symmetry then something virtual has become observable. In other words, any electromagnetic broken symmetry can and does absorb virtual energy from the vacuum, integrate it coherently into quantum sized particles (photons), and emit those real, observable photons at light speed in all directions. This process – the solution to the long-neglected “source charge problem” – is what produces the steady-state or “static” electromagnetic fields. Such fields are actually continuous, free flows of real, usable electromagnetic energy.

The entire “free energy from the vacuum” problem is simply this: Given incredible “free electromagnetic energy wind” available and automatically provided from every electromagnetic broken symmetry (dipolarity) in the universe, how does one build a proper asymmetric “windmill” to intercept and collect some of that real, free, continuous “electromagnetic energy wind energy” and then separately dissipate it in its loads to power them? All our electrical engineers think, design, and build only symmetrical windmills, which use half their freely collected electromagnetic energy to do nothing but destroy their own source dipolarity furnishing the free wind! The other half is used (in the forward emf region) to power the losses and loads of the external circuit.

So half the “freely collected” energy is normally used (in the EE’s symmetrical circuits and systems) to destroy the wind source itself, and the other half is used to power the external loads and losses. Well, to keep the wind flowing, we have to keep “restoring” the internal dipolarity (broken symmetry) of the generator as fast as it is being destroyed. That is what “cranking the shaft of the generator” actually accomplishes; it doesn’t send a single joule of energy directly out onto the external circuit or power line! Note that the rigorous definition of work is the change of form of energy. When we crank the generator shaft, we input mechanical energy, which once the generator rotates is changed (courtesy of Nikola Tesla!) into rotating magnetic field energy inside the generator itself. In turn, this rotating magnetic field energy is dissipated totally inside the generator, to force opposite charges apart and thus to produce that magic source dipolarity with its broken symmetry. The broken symmetry of this internal dipolarity then absorbs virtual state energy from the seething virtual state vacuum, and transforms it to real, observable photons (real, usable electromagnetic energy) which it continually pours out. It is this stream of real electromagnetic energy flow that pours from the terminals of the generator and along through space outside the external conductors.

A tiny portion of this giant energy flow (the Poynting component) is diverged into the conductors to “power up the electrons” and thus power the circuit. A huge curled giant Heaviside component remains, but (in any special relativistic situation) is not diverged, does not interact, and does nothing.

But the generator actually outputs more than a trillion times as much total electromagnetic energy flow (in both the feeble Poynting electromagnetic energy flow component and the accompanying giant Heaviside curled electromagnetic energy flow component) as the mechanical energy that we physically input to the shaft of the generator.

The knowledge of Heaviside’s giant usually-nondiverged energy flow component is what Morgan also had “scourged” from the theory by Lorentz in 1900, so that all the future electrical engineers would think that they only produce the diverged Poynting component of energy flow and nothing else.

Very good modern classical electrodynamicists continue to ignore any and all curled energy flow components accompanying the Poynting linear flow component.

As you can see, our electrical engineers are deliberately (and unknowingly) trained to only build symmetrical systems that destroy their free energy wind input faster than they use some of it to power the loads, and that do not do anything “general relativistic” so that a part of that now-unaccounted giant curled Heaviside electromagnetic energy component also gets diverged (and thereby converted into an extra Poynting energy component). In short, our own electrical engineers, professors, and departments self-enforce COP<1.0 performance and are thereby directly responsible for the world energy crisis, giant pollution of the biosphere, and the deaths of hundreds of millions of impoverished peoples world wide!

The thing is this: Our scientific community should fund and permit the bright young theoreticians and bright young professors to tangle with the technical problem of how to go about building asymmetrical interception and powering systems, once they easily assemble a free electromagnetic energy wind source for furnishing the input energy freely from the vacuum. Let them first remove the diabolical Lorentz symmetrization from their present Heaviside equations, and then ponder how to then build a nice “asymmetric windmill” that will intercept and collect some of that freely flowing electromagnetic energy, and will separately use (dissipate) it to power the external loads without disturbing the “crossed dipoles and their broken symmetry”.

Comment by Gary Vesperman: Was John Pierpont Morgan really that sharp a bean-counter?!! In spite of his demonstrated ruthlessness and his exploitation of the genius Nikola Tesla, we would have to give him credit for his conjunction of acute business acumen with his not inconsequential understanding of physics. Morgan left a legacy of energy invention suppression that endures to this day. https://www.theorionproject.org/en/documents/Gary_V.pdf

Sun, Jan 19, 2014 - 2:56pm
DayStar
Offline
Joined: Jun 14, 2011
2586
14106

RE: Maxwell's Equations

beach_bum, Bearden seems to have one of the best grasps of the theory behind electromagnetism. I have often wondered why he is content to just publish papers and have a web site. It seems that at one time he was building some things, but as is always the case with FE, it never reaches fruition.

It sounds like what Mr. Fix is trying to do is what Bearden suggests: break symmetry and tap into some of the curled Heaviside component of the electromagnetic energy wind. He and I are encouraged that a voltage was induced in the secondary coils of his apparatus. I am praying for his success, and being the mechanical genius that he is, he probably will get there.

DayStar

Sun, Jan 19, 2014 - 4:23pm
Mr. Fix
Offline
-
NY
Joined: Jun 8, 2012
10736
64164

Some pictures: ( will be followed by an explanation.)

"When the student is ready, the teacher will appear."
Sun, Jan 19, 2014 - 5:15pm
Mr. Fix
Offline
-
NY
Joined: Jun 8, 2012
10736
64164

Hi guys, having a lazy day.

 Beach bum, thank you for that post, both me and little Fix read it with great interest, I had not spent as much time on “the Orion project” as I need to, and little Fix is fascinated by Maxwell's equations.

 Some of the correspondence that I sent to China paid off, and I have exactly 1 kg of “neodymium magnetic powder” bought and paid for, and on its way to me. The plan is, I will remove all those trim nails, mix the neodymium magnet powder with both parts of epoxy resin and hardener, then fill my four slots with this mixture. I am thinking it should greatly increase the magnetic flux.

 Yesterday, I did take the time to wind some coils, on one set of magnets, it's 26gauge, 750 feet on each magnet, and I am getting approximately 1 V off the set. One thing that is of interest, is that I have run this generator now for hours, and screwdrivers stick to my nails. (They are completely magnetized now). Also, my voltage seems to be dropping over time as a result of this. The nails have to go.

 In the above post, I thought I would show you some pictures of my “Adams motor/generator”, I built it a couple of years ago, and I am finding with much amazement how difficult others are finding it to reproduce one.

 I'll give you a brief explanation:

 The wheel in the middle has eight 1 1/2 inch by half-inch neodymium magnets embedded in the wheel, which is laminated Lexan. (13 layers glued together with epoxy).

 The principal, is that the magnets in the rotor are drawn towards the stator coils through sheer magnetism, with no power applied. Then, a very brief pulse of electricity is used to release the magnetic field between the stator and the magnet, which frees the rotor to move on, until the next magnate is drawn into attraction to the stator.

 The back pulses that are generated from the stator coils (which have two separate windings in each coil) are captured, (in the capacitors), and when the capacitors build up approximately twice the voltage of the battery, the timing gears on the backside of the generator close a circuit and dump the contents of the capacitor back into the battery.

 Instead of using electronic timing circuits, I used the plastic gears contained in a power wheels transmission,

 and instead of using reed switches, transistors, and timing devices to pulse the coils, I cut a piece of three-quarter inch copper pipe so that it comes to an eight point commutator, if I move the brushes (outward towards the tips), it will reduce the dwell of the electricity applied to the coils. By simply rotating the commutator, I can adjust the timing. Instead of using brushes, I used tiny roller bearings to reduce drag.

 The whole trick to this is to have that rotor spinning with virtually no resistance whatsoever, there are many tricks employed to accomplish this, but if you try to use this rotor to turn anything other than itself, it will not work.

 I ran this motor for three months straight, and the batteries remained fully charged. It can operate on either 12 or 24 V.

The other set of coils, are pure generator coils, but Lenz law does apply, so the more I draw from them, the slower the rotor turns..

 There is a huge balancing act involved in making this motor work, and I am quite skeptical as to whether this will ever produce more energy than what is put into it. (It barely breaks even).

I learned a tremendous amount in the process of investigating, and building this motor, knowledge which I can now apply to my current project.

 This week, while I'm waiting for my neodymium magnet powder to arrive, I will get the high-voltage circuitry functioning, this may in fact take two automotive coils, two separate sets of points, so they alternate pulses.

 The adjacent set of magnets with the coils wrapped around them are out of phase with each other, so it will probably take two coils and all the accompanying hardware to get the timing right.

 With what I've been reading, I agree with DayStar, in that I am probably approaching this from the right perspective.

 The fact that I'm only currently getting 1 V out of the coils is kind of meaningless, since ultimately, I plan on using those coils to seriously disrupt the zero point energy field, and draw the power from that.

 It's probably not particularly relevant at this point, but I tried shorting the coils out, and the rotor does not slow down.

 I can't say the same for the Adams motor.

"When the student is ready, the teacher will appear."
Sun, Jan 19, 2014 - 6:05pm
dgstage
Offline
-
Horseshoe Bay, TX
Joined: Jun 14, 2011
1637
6732

Abguy

That was good video, and thanks for posting. I listen to Ben Fuchs on Genesis radio network a lot of days at 10am central. He talks about a lot of the same things. I do take iodine on daily basis. I also understand that the nascent iodine is really good, I take Dulse which comes from sea kelp.

dgfish
Sun, Jan 19, 2014 - 8:12pm
DayStar
Offline
Joined: Jun 14, 2011
2586
14106

RE: Lentz Law

Mr. Fix, are you saying that in its present configuration that your Lentz disrupting motor can charge itself and keep on running? What made me wonder is you said, "I tried shorting the coils out, and the rotor does not slow down." So, the motor must be running, but it could be running off the battery. There is no talk of capacitors in the Lentz motor, but you did talk about a rectifier bridge circuit. So, just wondering. One volt probably would not charge anything, but it could be stepped up (with associated losses) through a transformer. I guess the real issue is the kind of power you are getting. One volt at ten amperes would be significant (P = IV is 10 Watts). smiley

Thanks,

DayStar

Sun, Jan 19, 2014 - 9:28pm (Reply to #4078)
Mr. Fix
Offline
-
NY
Joined: Jun 8, 2012
10736
64164

DayStar:

My last post might have been a little bit confusing, since it covered the pictures above it, which are also out of order, sorry about that. The “pulse motor” is a invention by Robert Adams, of New Zealand, and there have been many attempts to replicate it, it proclaims to be able to run over unity, and when I was talking about Lenz law, it definitely applies to the Adams motor. What I am creating now is loosely based on “Don Smith's separating coil generator”, of which there is no information available, Other than the sketch that I posted. 

 I have concluded that the plywood prototype that I showed pictures of does not function, there are just too many things wrong with the picture. However, I really really like the design, and am going to work with it as a basic configuration. When I said I shorted the coils out last night to see if it would slow the motor, that was only to see if Lenz's law applied. I don't even think it matters, what I have in mind would make it largely irrelevant, but from what I can see, there is no way to slow that rotor down.

 Right now, it is simply being powered by the 12 volt battery that you can see attached to the backside of the housing. I am a very long way from making this self powered.

 There are a lot of things about Don Smith's drawings that are just flat out wrong, but I think there are some good hints.

 At this point, except for the configuration looking somewhat similar to that plywood prototype, moving forward, the design is entirely my own.

 I am just going to try to apply some basic principles that I have uncovered that claim to harness zero point energy.

 I was almost going to use as an analogy, “flash the universe”, after Dyna mo hum posted his experience with his welder. I am familiar with flashing an alternator, since there are no magnets internal to it, without an electrical charge to create one, nothing happens.

 I would contend that harnessing zero point is a similar concept, but a completely different application.

 According to many inventors, including Tesla, and Smith, high-voltage/high-frequency pulsed electricity can be used to disrupt the zero point field, and then with the appropriate coils, (an entirely different circuit), this field can be harnessed.

 For example, if I wanted to make this a good traditional generator, the coils would need to look more like the ones that I already made for the “Adams motor/generator” which are nearly 2 inches in diameter, and so far, I've only made coils for the “Smith design” that are only 3/4 inch diameter.

 There is a reason for this, the generator coils, and the stator coils in the “Adams motor” were carefully designed by me to capture as much flux as possible, electrically speaking, these magnets radiate an approximately 2 inch sphere of influence around them.

 Just for the record, the Adams motor is self powered, But it is not perpetual motion, it is a high maintenance machine.

 Even though the commutator is purely mechanical, it gets encrusted with soot, and needs to be cleaned daily, and since all of the grease seals have been removed from the bearings, (to reduce friction), they need to be oiled daily. Also, the copper contacts and pickups that I used to recharge the batteries spark loudly when connected, and the copper contacts burn away after a week or so, and must be replaced.

 It's simply a proof of concept, but it is a sturdy and reliable one. It still works perfectly.

 But I am not building a “traditional generator”.

 Those coils that I just wound yesterday, will get the 15,000 V off the automotive coil put through them,

 I'm counting on extra energy being taken out of the universal field, (zero point) to help drive the outer coils,

 the ones on display on the plywood mockup.

 It's just a theory, I've got a lot of building to do to prove that concept.

 Don't worry, when I get it to be “self powered”, you'll be one of the first to know.

 That may be another month from now.

 By then, I intend to have my spinning wheel buried in all kinds of electrical components.

 The exact nature of these components are the things that keep me up at night.

 Right now, I'm taking the time to read Maxwells equations,

 I'm hoping I can make some sense of them.wink

"When the student is ready, the teacher will appear."
Mon, Jan 20, 2014 - 3:02am
BagOfGold
Offline
-
The Universe
XX
Joined: Aug 5, 2011
2371
15486

Having trouble sleeping?...

Missing time?...You're not alone!!!...

ALIEN CONTACT - A Global Phenomena - FEATURE FILM



Bag Of Gold

Mon, Jan 20, 2014 - 9:30am
dgstage
Offline
-
Horseshoe Bay, TX
Joined: Jun 14, 2011
1637
6732

WOW: Former U.S. Senator Says

WOW: Former U.S. Senator Says Military & Wall Street Essentially Run Our Government… AND Claims… UFO Disclosure Is Near

https://sgtreport.com/2014/01/wow-u-s-senator-mike-gravel-says-ufo-discl...
dgfish

Notice: If you do not see your new comment immediately, do not be alarmed. We are currently refreshing new comments approximately every 2 minutes to better manage performance while working on other issues. Thank you for your patience.